(Politeknik Penerbangan Surabaya, Indonesia)*corresponding author
AbstractDeparting from the lack of utilization of used oil waste and the absence of a good tool to utilize used oil in addition to processing waste waste quickly and thoroughly. On the other hand, when used as fuel, used oil does not produce perfect combustion so it is necessary to accom-pany the waste fuel tool with water so that the flame is stronger. The methods used in this de-sign include making tools, collecting data, making models in software, then analyzing struc-tures using the Finite Element Analysis (FEA) simulation method. The application used is Solidwork. Numerical simulation can show heat transfer by convection and conduction. The heat source from the bottom of the burner can be shown to creep from the bottom to the top of the burner. The heat transfer tends to be uneven from one part to another as shown in the heat transfer graph.
Keywordsburner, convection, conduction, Solidwork
|
DOIhttps://doi.org/10.47679/jrssh.v5i1.379 |
Article metrics10.47679/jrssh.v5i1.379 Abstract views : 149 |
Cite |
References
Achmad, S. N., Nugroho, R. A., Mardliyah, I., & Oktavia, N. (2017). Rancang Bangun Incinerator Limbah Medis Berteknologi Plasma sebagai Filter Udara Hasil Pembakaran Limbah Medis. Industrial Research Workshop and National Seminar, Vol 8, 575–579.
Hariyadi, S. (2019). Studi Aerodinamika Shifted Downstream Winglet Untuk Wing Airfoil Eppler 562 Pada Unmanned Aerial Vehicle. In Doctoral Thesis (Issue Surabaya: Institut Teknologi Sepuluh November). Institut Teknologi Sepuluh Nopember.
Junaidi, J., Kurniawan, E., & Lasmana, A. (2021). Analisis Laju Aliran Udara dan Laju Aliran Massa Bahan Bakar Terhadap Beban Pembakaran Sampah pada Incinerator Berbahan Bakar Limbah Oli Bekas. Jurnal Engine: Energi, Manufaktur, Dan Material, 5(1), 17. https://doi.org/10.30588/jeemm.v5i1.838
Mahardhika, K. E., Santoso, D. T., & Kasiadi, K. (2020). Pengaruh Kecepatan Udara dan Debit Bahan Bakar pada Pembakaran Burner Berbahan Bakar Oli Bekas. Jurnal Teknik Mesin ITI, 4(3), 94. https://doi.org/10.31543/jtm.v4i3.451
Pratama, A., Basyirun, B., Atmojo, Y. W., Ramadhan, G. W., & Hidayat, A. R. (2020). Rancang Bangun Kompor (Burner) Berbahan Bakar Oli Bekas. Mekanika: Majalah Ilmiah Mekanika, 19(2), 95. https://doi.org/10.20961/mekanika.v19i2.42378
Setyo Hariyadi, S. P., Sutardi, & Widodo, W. A. (2018a). Numerical study of flow characteristics around wing airfoil Eppler 562 with variations of rearward wingtip fence. AIP Conference Proceedings, 1983. https://doi.org/10.1063/1.5046207
Setyo Hariyadi, S. P., Sutardi, & Widodo, W. A. (2018b). Numerical study of flow characteristics around wing airfoil Eppler 562 with variations of rearward wingtip fence. AIP Conference Proceedings, 1983. https://doi.org/10.1063/1.5046207
Setyo Hariyadi, S. P., Sutardi, Widodo, W. A., & Mustaghfirin, M. A. (2018). Aerodynamics Analysis of the Wingtip Fence Effect on UAV Wing. International Review of Mechanical Engineering, 12(10), 837–846. https://doi.org/10.15866/ireme.v12i10.15517
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Setyo HARIYADI SURANTO PUTRO Hariyadi
This work is licensed under a Creative Commons Attribution 4.0 International License.
______________________________________________________________________________________________
Journal of Research in Social Science And Humanities
Published by Utan Kayu Publishing
Email: jurnal.jrssh@gmail.com